How to operate the Mobile Front Load Dumpster?

2022-10-13 02:06:10

Dumper refers to a vehicle that unloads goods by itself through hydraulic or mechanical lifting. It is also called dumper. It is composed of automobile chassis, hydraulic lifting mechanism, cargo box, power take-off device and other components. In engineering construction and ore mining, Mobile Front Load Dumpster has been playing an important role. Heavy load, high-frequency lifting, loading and unloading, bad working conditions, etc., consume a lot of vehicles, and are also prone to accidents. Operation step 1 of trunk lifting: park the vehicle on a flat road and pull up the hand brake valve to make it in the braking position; 2. Place the gearbox in neutral gear and the pneumatic control valve in "mid stop" gear; 3. Step down the clutch pedal, pull the power take-off switch to the engagement position, release the clutch, and the power take-off is engaged at this time; 4. Push the air control valve to the "lifting" position, and then the cargo box starts to rise. You can control the lifting speed of the cargo box with the size of the accelerator; 5. When the cargo box rises to the ideal position, release the accelerator and place the air control valve at the "mid stop" position;

Step 1: Step down the clutch pedal, pull the power take-off switch to the off position, release the clutch, and then the power take-off is off; 2. Slowly push the air control valve to the "lowering" position. The lowering speed is controlled by the proportion of the air control valve. This step must be slow; 3. When the cargo box is lowered to the low position, place the air control valve in the "middle stop" position.

Maintenance requirements for Mobile Front Load Dumpster 1. Load in strict accordance with regulations; 2. Pay attention to and check the upper and lower supports of the hydraulic cylinder, and observe whether the moving parts and their adjacent fixing parts are abnormally damaged or deformed; 3. Check the hydraulic system for damage or leakage; 4. Each oil filling point must be filled once a week; 5. Check the use of accessories and whether the bolts and nuts are loose and tightened; 6. The hydraulic oil must be kept clean, and the hydraulic oil must be replaced regularly and timely, and the sediment must be removed;

Special tips 1. It is forbidden to carry out welding, drilling and other operations at any part without permission; 2. It is strictly forbidden to load in a centralized way, under unbalanced load, overload or fully loaded; 3. Before driving, check that the power take-off is closed and the handle of the control valve is in the "down" position; 4. Before lifting the heavy truck, make sure that the manual hook, door opening mechanism and the overturning pin at the lifting side of side unloading are opened; 5. When the carriage is lifted, the engine speed shall not exceed 1500r/min, and the carriage shall not be lifted excessively; 6. Frequently check the working conditions of all parts of the vehicle to avoid early damage of parts; 7. During maintenance, pay attention to vehicle cleanliness to avoid vehicle performance degradation; 8. Before departure, check whether the connection of each part is reliable. If there is looseness and dislocation, it must be fastened and reset.